 Paint Removal From 2.0 Fuchs?, Damage control |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Ottomotion |
 Nov 17 2023, 04:53 PM
Post
#1
|
|
Member  Group: Members Posts: 65 Joined: 12-January 23 From: Central California Member No.: 27,090 Region Association: None  |
Have a set of 2L fuchs that have been painted with black in the 'low spokes'.
I prefer the factory all metal look. Wondering about recommendations for paint removal. Chemical? Pressure wash? Obviously want to retain the stock look without damaging the underlying alloy. What would you do? Thanks.... |
   |
 
|
  |
Replies
| brant |
Nov 18 2023, 01:02 PM
Post
#2
|
|
914 Wizard Group: Members Posts: 11,949 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains 
|
It’s great for anything that you intend to polish
I’ve got 30 wheels to prove it Yes they get polished after stripping. Sanding if necessary for gouges Then multiple steps of buffing with progressively finer compounds |
 |
|
Posts in this topic
Ottomotion Paint Removal From 2.0 Fuchs? Nov 17 2023, 04:53 PM
mepstein Good chance it was rattle can and may come off pre... Nov 17 2023, 05:53 PM brant Are they aftermarket Fuchs ?
Could be baked finish... Nov 17 2023, 07:30 PM brant Half of them Nov 17 2023, 07:32 PM JeffBowlsby I recall cleaning up a set with acetone. I think ... Nov 17 2023, 09:57 PM Ottomotion Thanks for the feedback. They are factory and the ... Nov 17 2023, 11:53 PM
mepstein
Thanks for the feedback. They are factory and the... Nov 18 2023, 05:52 AM porschetub
Thanks for the feedback. They are factory and th... Nov 18 2023, 12:38 PM Unpretentious I used Klean Strip, available at Home Depot etc., ... Nov 18 2023, 12:13 AM dhuckabay Two bits here. Oven cleaner as pointed out above ... Nov 18 2023, 12:43 PM technicalninja The trick for using lye on aluminum stuff is to no... Nov 18 2023, 01:40 PM technicalninja Safety tips:
Oven cleaner: you need variable airf... Nov 18 2023, 01:59 PM Ottomotion What about using a heat gun? Nov 18 2023, 08:01 PM technicalninja Heat will help the cleaners work.
Heat by itself ... Nov 19 2023, 12:36 AM Mikey914 Heat is a good way to go. Don't use oven clean... Nov 20 2023, 12:47 AM Unpretentious I should have been clearer in my earlier response.... Nov 20 2023, 10:09 PM MikeK Since CA and CO have banned MEK, I've found th... Nov 21 2023, 07:46 AM Jett I bought some citrusstrip and am going to try it o... Nov 21 2023, 12:13 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th May 2025 - 08:48 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.