 Im looking for a quality shop that can do an align bore, Help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Red76 |
 Jan 12 2024, 04:19 PM
Post
#1
|
|
Newbie  Group: Members Posts: 37 Joined: 28-December 16 From: East Tennessee Member No.: 20,703 Region Association: None  |
I have a ‘73 914;with a 2.0L engine. The car hasn’t been on the road since 1990. Since the engine was out of the car when I bought it I decided now is a perfect time to go through it. As I tore it down I found lots of easter eggs indicating the PO tried to do a top overhaul.(valve job and new pistons and cylinders).as I dug deeper it appears that something was very out of balance in the rotating mass. With all that said im sure an align bore is in order.
Does anyone know of a shop that currently does this and can you provide contact information please. Thanks in advance. |
   |
 
|
Posts in this topic
technicalninja https://www.automotivemachine.com/
These folks st... Jan 12 2024, 04:33 PM
ClayPerrine
https://www.automotivemachine.com/
These folks s... Jan 12 2024, 04:39 PM porschetub EMW do all you will need ,seems there are the best... Jan 12 2024, 05:42 PM Freezin 914 I’ll add that you could check with Mofoco in Mil... Jan 12 2024, 06:04 PM bkrantz I used European Motorworks in Hawthorne CA for lin... Jan 12 2024, 10:30 PM DennisV
With all that said im sure an align bore is in or... Jan 13 2024, 08:09 AM Red76 Thanks all for your input. Looking at all the shop... Jan 13 2024, 08:17 AM technicalninja
[quote name='technicalninja' post='3123257' date=... Jan 13 2024, 11:08 AM 930cabman
I have a ‘73 914;with a 2.0L engine. The car ha... Jan 13 2024, 12:34 PM stownsen914 Whichever shop you choose can first measure the ca... Jan 13 2024, 05:46 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th April 2026 - 10:15 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.