 Im looking for a quality shop that can do an align bore, Help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Red76 |
 Jan 12 2024, 04:19 PM
Post
#1
|
|
Newbie  Group: Members Posts: 37 Joined: 28-December 16 From: East Tennessee Member No.: 20,703 Region Association: None  |
I have a ‘73 914;with a 2.0L engine. The car hasn’t been on the road since 1990. Since the engine was out of the car when I bought it I decided now is a perfect time to go through it. As I tore it down I found lots of easter eggs indicating the PO tried to do a top overhaul.(valve job and new pistons and cylinders).as I dug deeper it appears that something was very out of balance in the rotating mass. With all that said im sure an align bore is in order.
Does anyone know of a shop that currently does this and can you provide contact information please. Thanks in advance. |
   |
 
|
  |
Replies
| technicalninja |
Jan 13 2024, 11:08 AM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,531 Joined: 31-January 23 From: Granbury Texas Member No.: 27,135 Region Association: Southwest Region 
|
QUOTE(ClayPerrine @ Jan 12 2024, 04:39 PM)  QUOTE(technicalninja @ Jan 12 2024, 04:33 PM) https://www.automotivemachine.com/ These folks started out as the only import machine shop in Ft Worth 50+ years ago. They specialized in VW. They currently sell a highly modified type1 that is used in the petroleum industry as a well pump. Much less expensive than what is available and lasts 3-5 times longer. VW FREAKS! I used automotive machine professionally for years. They did the machine work on the 4.0L motor. But the last time I checked with them, they no longer had the tools to align bore a VW Type IV. Oops! I haven't called them about my T4 yet, I had no idea they couldn't do everything now! That screws up my plans... (IMG:style_emoticons/default/headbang.gif) (IMG:style_emoticons/default/headbang.gif) (IMG:style_emoticons/default/headbang.gif) (IMG:style_emoticons/default/headbang.gif) (IMG:style_emoticons/default/headbang.gif) (IMG:style_emoticons/default/headbang.gif) (IMG:style_emoticons/default/headbang.gif) Sorry for posting bad info! |
|
|
|
Posts in this topic
Red76 Im looking for a quality shop that can do an align bore Jan 12 2024, 04:19 PM
technicalninja https://www.automotivemachine.com/
These folks st... Jan 12 2024, 04:33 PM
ClayPerrine
https://www.automotivemachine.com/
These folks s... Jan 12 2024, 04:39 PM porschetub EMW do all you will need ,seems there are the best... Jan 12 2024, 05:42 PM Freezin 914 I’ll add that you could check with Mofoco in Mil... Jan 12 2024, 06:04 PM bkrantz I used European Motorworks in Hawthorne CA for lin... Jan 12 2024, 10:30 PM DennisV
With all that said im sure an align bore is in or... Jan 13 2024, 08:09 AM Red76 Thanks all for your input. Looking at all the shop... Jan 13 2024, 08:17 AM 930cabman
I have a ‘73 914;with a 2.0L engine. The car ha... Jan 13 2024, 12:34 PM stownsen914 Whichever shop you choose can first measure the ca... Jan 13 2024, 05:46 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 02:56 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.