Hate to do this but I need a battery Options

[mb911]

I am not real excited to spend 300 for a new optima red top. What other options do I have and does it need to be AGM?

[mb911]

Ok ordered a 925 we will see

[fiacra]

Ok ordered a 925 we will see

My Odyssey 925 lasted only two years before it died. I'm back with the larger Odyssey 96R as my last one was 10 years old and going strong when I sold that car. I'd keep the 925 on a trickle charger at all times. If you are putting this in the stock location you will need a "frame" to put it in. You may also need the terminal posts. You can have mine if you want them. PM me with your address and I'll send it to you gratis.

@mb911

[mb911]

Ok ordered a 925 we will see

My Odyssey 925 lasted only two years before it died. I'm back with the larger Odyssey 96R as my last one was 10 years old and going strong when I sold that car. I'd keep the 925 on a trickle charger at all times. If you are putting this in the stock location you will need a "frame" to put it in. You may also need the terminal posts. You can have mine if you want them. PM me with your address and I'll send it to you gratis.

@mb911

Ordered the posts. What frame did you buy/use?

[fiacra]

Ok ordered a 925 we will see

My Odyssey 925 lasted only two years before it died. I'm back with the larger Odyssey 96R as my last one was 10 years old and going strong when I sold that car. I'd keep the 925 on a trickle charger at all times. If you are putting this in the stock location you will need a "frame" to put it in. You may also need the terminal posts. You can have mine if you want them. PM me with your address and I'll send it to you gratis.

@mb911

Ordered the posts. What frame did you buy/use?

@mb911

IIRC I got it on eBay. Pictures below. It fits perfectly into the stock battery tray but you cannot use the stock battery hold down. However it is such a tight fit that the battery can't move, unless you roll the car. If you know anyone with metal fabrication skills they probably could easily modify this to fit the stock hold down (IMG:style_emoticons/default/biggrin.gif)