 914-6 webers don't fully open, Help!!! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| si2t3m |
 Jun 3 2003, 08:27 AM
Post
#1
|
|
914 addict  Group: Members Posts: 346 Joined: 9-January 03 From: Qc, Canada Member No.: 119  |
I never really checked if the webers were fully opened at WOT. Guess what, they are not!
A little less that 1/4 travel is left to get the throttle plates fully straight. DOH!!! It accelerates fine but it could accelerate faster!!! (IMG:style_emoticons/default/smile.gif) Drop links from the crossbar to the carbs are nice & tight and are in sync @ 1000rpm and also at 4000rpm, so i'm figuring it's either some ajustement in the rod between the crossbar & the bellcrank on the engine or the rod between the bellcrank on the engine and the tranny or the ajustement on the throttle cable end at the tranny. I'm just not sure from what end i should start to playing with the linkage It seems like i'm running out of travel at the bellcrank on the tranny. Any basic things i should check before playing around with the linkage??? TIA Marc-André |
   |
 
|
  |
Replies
| djm914-6 |
Jun 3 2003, 10:10 AM
Post
#2
|
|
Happiness is: Getting on the road Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None |
Can someone please explain WOT? I asked my mechanic about the position of the butterflies and he told me that they shouldn't reach vertical. Mine are about 3/4 open with the pedal on the stop. If I adjust my stop down lower, all I do is bend the actuator and the rod rubs on the floor board.
Thanks, |
|
|
|
Posts in this topic
si2t3m 914-6 webers don't fully open Jun 3 2003, 08:27 AM
Lawrence914-6 Okay... are you sure the linkage is limiting your ... Jun 3 2003, 08:43 AM fuch toy Disconnect linkage, try to open carbs by hand........ Jun 3 2003, 08:50 AM Lawrence914-6 I hate to disagree with Zois, as he has much more ... Jun 3 2003, 08:57 AM fuch toy Welllllll.....it worked on 3.6 install...... Jun 3 2003, 09:06 AM Lawrence914-6 I'm sure you're right, Mike. Maybe the pe... Jun 3 2003, 09:10 AM si2t3m I took the end of the crossbar were it connects to... Jun 3 2003, 09:23 AM brant marc'-andre,
If I'm remembering correctl... Jun 3 2003, 09:31 AM fuch toy I still think you need to check for a stop under t... Jun 3 2003, 09:31 AM Lawrence914-6 I don't have my car here... so I'm going f... Jun 3 2003, 09:34 AM si2t3m Yes it's a conversion.
I'm running a /6 ... Jun 3 2003, 09:40 AM Lawrence914-6 I've never checked WOT on my carbs.
I have no... Jun 3 2003, 10:13 AM mskala |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd July 2025 - 03:13 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.
| All rights reserved 914World.com © since 2002 |
|
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |