Repro Door Panels with basket weave, correct in fi Options

[curtis]

Had this posted originally over in Classifieds, but it was recommended I post it here...

My friend Hirschel Riley and myself Shawn Anderson are making from scratch brand new complete and ready to install factory correct in fit and finish black door panels with the correct basket weave material for 1972-1974 914s. Available only in black. Price per pair is 250.00 with core exchange or 300.00 without. I know the price may or may not sound steep, but believe me these things are labor intensive, and they are gorgeous when finished! If you are concerned about second opinions you are more than welcome to call Kravig engineering in Riverside, CA and ask for Glenn Sager and he will tell you what he thinks. He has the first set produced besides the prototypes. If you have any additional questions please call Hirschel at (951) 634-6214.

(IMG:http://www.geocities.com/guppyfish101/914door_1-55.jpg)

(IMG:http://www.geocities.com/guppyfish101/914door_2-55.jpg)

(IMG:http://www.geocities.com/guppyfish101/914doordetail_1-55.jpg)

(IMG:http://www.geocities.com/guppyfish101/914doordetail_2-55.jpg)

Pics also viewable on a separate site - just click here .

[Qarl]

Yes, I would like GT door panels too.

Important to consider....

You should include the leather strap and the necessary hardware to mount and connect to the internal latch mechanism.

The older fiat door handles can be bought new around $10 per pair (iirc).

Also nice, would little screw recepticals to mount into the door frame, and the correct countersunk phillips-head screws and bezels.

And finally, if you can figure out a way to make a little rectangular grommet for the strap to pass through it would be 'da bomb!

Maybe you can offer basket weaver version and a plain vinyl version.