 986 Boxster cable, cable end removal |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Steve1956 |
 Jan 28 2025, 01:00 PM
Post
#1
|
|
Newbie  Group: Members Posts: 27 Joined: 4-November 22 From: Morocco,Indiana Member No.: 26,966 Region Association: None  |
Hi guys,is it possible to remove these cable ends? I want to replace them with heim joints.
 |
   |
 
|
  |
Replies
| ClayPerrine |
Jan 28 2025, 03:32 PM
Post
#2
|
|
Life's been good to me so far..... Group: Admin Posts: 16,435 Joined: 11-September 03 From: Hurst, TX. Member No.: 1,143 Region Association: NineFourteenerVille 
|
Another thing... on my car, I ran them through the speedo cable and shift rod openings on the firewall. But to do it, I had to turn the flanges down on the shifter end of the cables.
That involved fitting a long piece of pipe to the back of the lathe to support the cables, and spinning the lathe VERY slowly while removing the flange. Then once they were through and in the car, I just put another nut on the cable to anchor it to the shifter. |
 |
|
Posts in this topic
Steve1956 986 Boxster cable Jan 28 2025, 01:00 PM
ClayPerrine
Hi guys,is it possible to remove these cable ends... Jan 28 2025, 03:27 PM
worn
Another thing... on my car, I ran them through th... Jan 29 2025, 09:50 PM Steve1956 What I thought I would try if the rod is soft enou... Jan 29 2025, 01:00 PM 914_teener +1 on the Numeric cables. Shifts like silk. Jan 29 2025, 05:44 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th July 2025 - 09:40 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.