Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> engine is back in with radiator, as well as, radiator shroud pics
scotty914
post Feb 4 2005, 04:48 PM
Post #1


suby torque rules
***

Group: Members
Posts: 1,528
Joined: 20-July 03
From: maryland, the land of 25 year
Member No.: 924
okay as some of you know ( and some of you who dont care ) i built the radiator support frame, and welded it to the fire wall. then i sealed the frame off to the fire wall with sheet AL. now the radiator sits in the frame and get bolted to the top ( with grommets ). the first pic is the frame welded to fire wall with the shouding in place, i still need to make the scoop for the bottom though.

pic deleted by me
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
 Reply to this topicStart new topic
Replies
scotty914
post Feb 4 2005, 06:09 PM
Post #2


suby torque rules
***

Group: Members
Posts: 1,528
Joined: 20-July 03
From: maryland, the land of 25 year
Member No.: 924
QUOTE (scruz914 @ Feb 4 2005, 04:02 PM)
Will you be running a fan, either turned by the engine or electric?

1200 cfm fan controlled by the suby wiring and an overide switch

one thing i have not said anything about is the suby needs the heater core lines hooked up, if they are not hooked up the thermostat does not open, so i plan on putting in a motor cycle radiator with a fan ( the reason for using a radiator from a motor cycle is the cap will help in bleeding ) . in the summer i will just let the fan blow through the heater core ( motor cycle rad ) in the winter i will duct it through the stock heater tubes for heat. so i will be gaining an addition 100 square inches or so of constant air flow for cooling.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
scott thacher   engine is back in with radiator, as well as   Feb 4 2005, 04:48 PM
scott thacher   another shot of the shrouding on the drivers side ...   Feb 4 2005, 04:50 PM
scott thacher   okay here is a pic of the radiator mounted to the ...   Feb 4 2005, 04:52 PM
scott thacher   okay second to last, the engine bolted back in to ...   Feb 4 2005, 04:54 PM
scott thacher   last pic ... front of motor showing the pully clea...   Feb 4 2005, 04:56 PM
Mueller   sweet....hope it works, you might be proving a bun...   Feb 4 2005, 05:05 PM
McMark   Pulls air from under the car?   Feb 4 2005, 05:17 PM
bondo   Looks nice! I wish I had room to do that   Feb 4 2005, 05:29 PM
scott thacher     Feb 4 2005, 05:30 PM
McMark   Sounds like it's gonna work perfect for that 4...   Feb 4 2005, 05:32 PM
scruz914   Will you be running a fan, either turned by the en...   Feb 4 2005, 06:02 PM
scott thacher   <...   Feb 4 2005, 06:09 PM
SpecialK   Pretty slick Scott http://www...   Feb 4 2005, 07:45 PM
MecGen   COOL Keep us informed. Maybe take a pic from under...   Feb 5 2005, 06:56 AM
mattillac   scott, you're my hero!
 

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

- Lo-Fi Version Time is now: 13th March 2026 - 10:59 AM
Invision Power Board v9.1.4 © 2026  IPS, Inc.
...
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...