 Turn Signal Cancellation, need help with part and replacement |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Kemo |
 Apr 25 2026, 10:18 AM
Post
#1
|
|
Member  Group: Members Posts: 53 Joined: 8-February 06 From: Austin, TX Member No.: 5,546  |
all,
my turn signal does not reset by itself. After digging around, i think mine is broken. here is a pic of mine:  with a little bit of the search engine i found this post. http://www.914world.com/bbs2/index.php?showtopic=346481 the column in question has a big spring on it that looks like the King Ranch emblem.  I have a 1973 and i have been able to find some newish switches on Ebay and even some new ones from Sierra Madre: https://sierramadrecollection.com/products/...ASABEgLhffD_BwE but from the thread listed above,the one from SMC might not be the correct part. does anyone have a good source for the part? Also, im seeing parts that have a #5 or #6 appended to the part number 91461391315 which seems to be the part number but with different versions. Can anyone help with the part number i should be looking for? And if i can use a 75-76 as this seems to be the latest part available? And last but not least! is there a how-to on pulling out the steering column front part where all the turn and wiper controls are? im guessing i just need to pull the front part out and not the whole column. i think there is a bearing in there that could probably be replaced as well. I know this is alot, but any help is greatly appreciated. Steve Kennemer Wimberley TX |
   |
 
|
Posts in this topic
  |
3 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
1 Members: 914werke
|
Lo-Fi Version | Time is now: 25th April 2026 - 03:34 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.