 remote start button, wiring help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| machina |
 Mar 2 2005, 01:09 PM
Post
#1
|
|
Advanced Member  Group: Benefactors Posts: 2,030 Joined: 21-June 03 From: Miami Beach, FL Member No.: 848   |
I want a remote start button in the engine bay. Do I just attach the 2 wires from the button to the the big pole and ignition tab on the starter directly?
|
   |
 
|
  |
Replies
| scotty914 |
Mar 2 2005, 10:47 PM
Post
#2
|
|
suby torque rules Group: Members Posts: 1,525 Joined: 20-July 03 From: maryland, the land of 25 year Member No.: 924 |
you can take a spade terminal from the connector at the rear left side of the relay board, one of the 2 rear terminals. then to the battery with switch, no need to climb under the car.
|
|
|
|
Posts in this topic
synthesisdv remote start button Mar 2 2005, 01:09 PM
john rogers I wired mine from the kill switch outlet to the st... Mar 2 2005, 01:12 PM Rand What you suggested will work. Big pole (12v) to so... Mar 2 2005, 02:20 PM synthesisdv Is there a liabiltiy to doing this?
One thing I t... Mar 2 2005, 02:32 PM Rand Make sure the connections are clean and protected ... Mar 2 2005, 02:48 PM Flat VW Have your wife start the car, that's what the ... Mar 2 2005, 05:19 PM bd1308 i was going to say mount it in the rear trunk but ... Mar 2 2005, 05:28 PM redshift Just use clips, and remove it when you are not wor... Mar 2 2005, 05:29 PM bd1308 <... Mar 2 2005, 05:33 PM redshift And subject to the elves of hell when you least ex... Mar 2 2005, 05:39 PM Brando From the solenoid to the big + pole works perfectl... Mar 2 2005, 08:19 PM scruz914 Mar 2 2005, 08:40 PM Flat VW Arcing around a battery can be a problem in some c... Mar 2 2005, 08:46 PM scruz914 Mar 2 2005, 09:06 PM Type 4 Here is a Marine switch that will work
http://www.... Mar 2 2005, 10:12 PM Bruce Allert I found a nice horn button about an inch in diamet... Mar 2 2005, 11:11 PM
Racer Chris I have a 12v momentary switch attached to about 4 ... Mar 3 2005, 01:01 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th May 2024 - 05:22 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.