![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
Loser_Cruiser |
![]()
Post
#1
|
Member ![]() ![]() Group: Members Posts: 407 Joined: 4-April 05 From: Bellingham, WA Member No.: 3,873 Region Association: Pacific Northwest ![]() |
Looking for some advice. (IMG:http://www.914world.com/bbs2/html/emoticons/unsure.gif)
I bought a 76 2.0L FI DL 914. It did not run right and most of the electrical was not working also. Well, now I have head, signal, brake, emergency, backup lights, starter and wipers. Horn and trunk light are still an issue. I removed gas tank and flushed, good shape, replaced gas lines and fuel filter. Replaced plugs. points, condenser, rotor, cap and plug wires, new air filter, changed engine and transmission oil, and filter. Car started right up and runs very nice. Runs very nice for about 5 minutes and then cuts out like it not getting gas or loading up. Placed a pressure gauge on the FI today, and it stays at 30-32 psi when primed and running. When the car starts to cut out the pressure is still 30-31 psi. Vacuum lines look good and in the right place. Car is a California car and loaded with the EGR equipment, EGR pump is removed. Request some advice on the next hoop to jump thru. Has good charge and battery. Cleaned fuse box today, has good conductivity on the ground strap. Good charging system and battery. Cleaned FI, good spray!!! I am going to check the cyl pressure and valve tolerances tomorrow. Running out of things I know what to look at. H E L P !!!!!!!! Ian _________________ Come rescue me! We’ve got a line in the sky (IMG:http://www.914world.com/bbs2/html/emoticons/aktion035.gif) |
![]() ![]() |
Loser_Cruiser |
![]()
Post
#2
|
Member ![]() ![]() Group: Members Posts: 407 Joined: 4-April 05 From: Bellingham, WA Member No.: 3,873 Region Association: Pacific Northwest ![]() |
Buying the boxster would be nice but unecessary because the problem was that the guy who owned it before me had some crappy alarm installed but he diconected it and it was tied into all the lights and stuff like that. The starter is apparently new and wasnt hooked up so i fixed that. And now that the new rotor and wires are in it runs fairly well too. Thanks for the help though i will probably be asking a who lot more soon. Like how to post pictures?
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 9th May 2025 - 07:49 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |