 Reverse light switch, test it out of the car? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914zim |
 Jun 5 2005, 04:48 PM
Post
#1
|
|
Still pretty clueless...  Group: Members Posts: 221 Joined: 29-July 03 From: New Berlin, WI Member No.: 962  |
Fellas:
Is there a way to test the reverse light switch while it's removed from the car? I have everything taken apart for the clutch replacement and I was wondering if I need a new switch, because it's pretty banged up. Also, does anyone have a working used one laying around they'd sell me cheap? I'm finding it really hard to plunk down $80 for a new one! Thanks, Andy... |
   |
 
|
  |
Replies
| elocke |
Jun 5 2005, 10:34 PM
Post
#2
|
|
Member Group: Members Posts: 178 Joined: 9-February 03 From: Georgetown, MA Member No.: 272 |
Get a multimeter, ohm meter, beeper; anything that will tell you if you have an electrical connection. With the meter leads in the 2 contact receptacles on the switch, push a coat hanger end into the hole in the middle of the threads on the other side of the switch. This depresses a plunger that makes a connection inside the switch. If the switch is good you will get an indication of a connection, beep, needle deflection, etc. I have a switch from an early tranny that only makes contact at the very end of the plunger travel and didn't work with the pin in the tranny. I switched it with the switch from my '74 and it worked fine. To test the backup lights, unplug the 2 wires from the switch (make sure they don't touch any metal) turn the ignition on and touch the 2 wires together.
Good luck Ed |
|
|
|
Posts in this topic
914zim Reverse light switch Jun 5 2005, 04:48 PM
914zim Cool, thanks Ed!!! Jun 6 2005, 06:08 AM jr91472 never had one of those out of the tranny before...... Jun 6 2005, 06:59 AM elocke I've just taken mine out. There's a washe... Jun 6 2005, 08:36 AM
Red-Beard If the tranny is full of oil, leave the pin in. It... Jun 6 2005, 11:50 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th July 2025 - 03:43 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.