 pertronix, ignition help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914fire |
 Jul 11 2005, 03:27 PM
Post
#1
|
|
Captain Dave E7  Group: Members Posts: 200 Joined: 7-April 05 From: MO Member No.: 3,886  |
Im thinking of putting a petronix Ignitor on my carbed 1970 1.7 what all do I need to do this? I think the cam and dizzy are stock but dont reaaly know for sure.
|
   |
 
|
  |
Replies
| bd1308 |
Jul 11 2005, 03:49 PM
Post
#2
|
|
Sir Post-a-lot Group: Members Posts: 8,020 Joined: 24-January 05 From: Louisville,KY Member No.: 3,501 |
one 8mm deep socket... thats it. just install the ignitor ( i had to shave a little off of one of the sides....) and connect the black wire to the (-) side of the coil and the red to the (+) side of the coil. That's about it. Make sure your copper ground strap in the distributor is good as well.
|
|
|
|
Posts in this topic
914fire pertronix Jul 11 2005, 03:27 PM
Mueller remove dist. cap, remove the points, install pertr... Jul 11 2005, 03:51 PM 914fire any suggestions on the coil or where to buy the pe... Jul 11 2005, 03:58 PM bd1308 if you are talking about the pertronix points repl... Jul 11 2005, 04:21 PM wheelo I got my set-up from "Evil-Bay"... got hell-of-a-d... Jul 11 2005, 06:55 PM Tobra <... Aug 29 2005, 09:48 PM ! Do a search on the subject....there is a 50/50 spl... Aug 29 2005, 09:53 PM McMark It's a bolt in replacement. No other upgrades... Aug 29 2005, 09:54 PM Aaron Cox check your coil ohmage before you fry your pertron... Aug 29 2005, 10:00 PM Pugbug I've been using Pertronix in the dune buggy fo... Aug 29 2005, 10:11 PM Travis Neff 3 ohms for your coil, as per the directions. If i... Aug 30 2005, 12:09 AM Tobra so this is >3 ohm across coil then, one pole on +,... Aug 30 2005, 02:40 PM Travis Neff Kerreckt! Aug 30 2005, 03:01 PM
Aaron Cox Aug 30 2005, 03:10 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 08:09 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.