 Transmission fittings/plugs for use with coolers??, what hardware used??? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Mueller |
 Jul 25 2005, 11:20 AM
Post
#1
|
|
914 Freak!  Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None 
 |
Is there a standard AN fitting adapter that'll screw into the fill and drain openings of the transmission??
What are people using?? |
   |
 
|
  |
Replies
| ArtechnikA |
Jul 25 2005, 11:41 AM
Post
#2
|
|
rich herzog Group: Members Posts: 7,390 Joined: 4-April 03 From: Salted Roads, PA Member No.: 513 Region Association: None |
as AN fittings are ALWAYS English parallel threads and the standard fill and drain plugs are metric tapered pipe plugs, Question #1 would be a "no."
several people have reported drilling through the fill and drain plugs and welding/brazing/JB-gluing some kind of fitting. i'd recommend using the 19mm ATF 911/914.6 plugs for this, rather than the 17mm Inhex (Allen) plugs that are standard in the 914.4 the fill plug is 999.064.019.02 and the drain plug (with magnet) is 999.064.020.02. |
|
|
|
Posts in this topic
Mueller Transmission fittings/plugs for use with coolers?? Jul 25 2005, 11:20 AM
Mueller Hi Rich, you must not have seen the word adapter i... Jul 25 2005, 11:52 AM joea9146 I have 2 Transmission plugs that will fit. They ar... Jul 25 2005, 11:52 AM Mueller you have a PM on it's way ... Jul 25 2005, 11:54 AM ArtechnikA i expect Mike will jump on those, but if not, can ... Jul 25 2005, 11:55 AM
john rogers I made my suction fitting by drilling and pipe tap... Jul 25 2005, 12:13 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st May 2024 - 09:31 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.