 TPS, Clean or replace? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| meares |
 Aug 16 2005, 08:55 AM
Post
#1
|
|
Member  Group: Members Posts: 403 Joined: 23-March 05 From: Atlanta Member No.: 3,800  |
if i should clean it....do i clean it with Brakleen or fuel inj. cleaner or spray carb cleaner?
|
   |
 
|
  |
Replies
| phantom914 |
Aug 16 2005, 08:59 AM
Post
#2
|
|
non-914-owner non-club member Group: Benefactors Posts: 1,013 Joined: 24-February 04 From: Covina,CA(North ofWest Covina) Member No.: 1,708  |
I used contact cleaner/lube. If a track is worn into the contacts (most likely), you can bend the arm a little to one side so that the tip wipes along a path a little to the side of the original path. Just make sure that the flat of the arm stays parallel to the surface of the contact board so that only the ball of the tip makes contact. Sorry I don't have pictures, but it will probably make sense once you have the thing apart. Oh, did I forget to mention that you will need to take the TPS apart?
Andrew |
|
|
|
Posts in this topic
meares TPS Aug 16 2005, 08:55 AM
meares contact cleaner/lube is found at FLAPS?.......... ... Aug 16 2005, 09:30 AM phantom914 An electronics store would have contact cleaner. I... Aug 16 2005, 09:40 AM meares Thank you http://www.914world.com/b... Aug 16 2005, 09:50 AM redshift I use a q-tip.
http://www.914world... Aug 16 2005, 09:52 AM
BMartin914 Yea, you can buy stabilant 22a for $70 a crac... Aug 16 2005, 01:23 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 09:56 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.