 Started with an oil change,, and ended with....... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| sportlicherFahrer |
 Sep 22 2005, 09:00 PM
Post
#1
|
|
Nothing to see here.  Group: Members Posts: 1,121 Joined: 18-April 05 From: Tacoma, WA Member No.: 3,945 Region Association: Pacific Northwest 
 |
routine oil change can lead to amazing things. I look up and to the right to where most people's hell hole exist and see the dirt all clumped up. So I take the rockers off and...
Attached image(s) 
|
   |
 
|
  |
Replies
| redshift |
Sep 22 2005, 09:09 PM
Post
#2
|
|
Bless the Hell out of you! Group: Members Posts: 10,926 Joined: 29-June 03 Member No.: 869 |
I spray out my rockers at least once a month. I go to a pressure wash, and aim the wand from the back, and then from the front.. sometimes it looks like a mudslide.
M |
|
|
|
Posts in this topic
spiritedTreiber Started with an oil change, Sep 22 2005, 09:00 PM
spiritedTreiber and the cleaned off surface.... Sep 22 2005, 09:02 PM spiritedTreiber the bad spot... Sep 22 2005, 09:03 PM spiritedTreiber the not so bad spot... Sep 22 2005, 09:03 PM spiritedTreiber drivers side.... Sep 22 2005, 09:03 PM spiritedTreiber nice and clean.... Sep 22 2005, 09:04 PM spiritedTreiber nasty.... Sep 22 2005, 09:05 PM spiritedTreiber easily dealt with.... Sep 22 2005, 09:05 PM ! Wire brush and POR 15 time....just in ime for wint... Sep 22 2005, 09:06 PM spiritedTreiber I honestly though it would be worse. Is this stuf... Sep 22 2005, 09:07 PM Hammy Doesn't look too bad. Just be happy you caught... Sep 22 2005, 09:07 PM spiritedTreiber I am going to remount the rockers with good lookin... Sep 22 2005, 09:12 PM Hammy ... Sep 22 2005, 09:33 PM spiritedTreiber http://www.914world.com/bbs2/htm... Sep 22 2005, 09:42 PM bmcwilli http://www.914world.com/bbs... Sep 23 2005, 11:01 AM olav Drill out the rivets with a smaller diameter drill... Sep 23 2005, 12:19 PM
spiritedTreiber There are about 6? rivits that you drill out along... Sep 23 2005, 01:08 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 11:52 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.