Help with EGT gage readings, What is their significance? Options

[Joseph Mills]

With my "new" engine I purchased the dual EGT gage the PO used. The headers already have the holes drilled for the sensors.

However, I received no instructions. I found a bit of info thru our search function, but still don't have much of an idea how to interprete the readings. What readings am I to expect?

The engine is in good shape with new heads, mallory ignition system and fairly new 44IDFs (also CHT gage on #3). Car is used for AX and somewhat limited, but spirited street use.

How can I utilize this gage to further tune this engine? And what will low or high readings possibly indicate?

Insight appreciated. (IMG:http://www.914world.com/bbs2/html/emoticons/rolleyes.gif)

..

[Dave_Darling]

As it was explained to me, there is an EGT at which your engine is running its best. That exact temp is determined by a lot of factors, though. So the best you can usually do is dyno the motor, tune for best power (carb jetting, etc.), and note the EGT under those conditions. Then you can re-tune later on when atmospheric conditions or whatever change--get back to that EGT, and you've got the engine back to the same state of (optimal, hopefully!) tune.

At least, that's the way one local 914'er used his.

--DD