 Second Gear Syncro |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Tom73 |
 Sep 24 2005, 11:16 AM
Post
#1
|
|
Member  Group: Members Posts: 180 Joined: 20-September 04 From: Central Texas Member No.: 2,792  |
The 2nd gear syncro on my '71 is just about gone, have to shift to second very slowly to keep from grinding.
Was wondering what it would cost, ballpark figure, to have the syncro replaced? Also, know of any shop in Central Texas, or Texas in general, that you would recommend? tom... (IMG:http://corvetteforum.net/c3/vette73/jj4.jpg) |
   |
 
|
  |
Replies
| Dr Evil |
Sep 24 2005, 06:03 PM
Post
#2
|
|
Send me your transmission! Group: Members Posts: 23,041 Joined: 21-November 03 From: Loveland, OH 45140 Member No.: 1,372 Region Association: MidAtlantic Region 
|
Contact Red-beard here on the board as he lives in Houston and has worked on a bunch of these. He taught me everything that I know and I have done quite a few myself. He is listed in the vendors section. The bearings are no longer $400, they are about $150 ea x2 and are much better thatn the originals if you even need them. You are lucky if it is only second as the parts are much cheaper. THe dog teeth should be below $150, if you need them. The synchro bands were $66 last I saw. What I would immagine you needing is at the worst:1 synchro, 2nd gear slider, 2nd dog teeth. I recommend searching for the prices of everything first. I like GPR for my parts as they are usually the cheapest and have always given me dependible service. If you have any questions or concerns, feel free to PM me.
|
|
|
|
Posts in this topic
Tom73 Second Gear Syncro Sep 24 2005, 11:16 AM
bd1308 things are very expensive....
synchros are like n... Sep 24 2005, 11:32 AM jr91472 Please define "central", there are several places ... Sep 24 2005, 11:35 AM Tom73 <... Sep 24 2005, 11:52 AM Cap'n Krusty Sep 24 2005, 12:16 PM bd1308 good point ....
just get the OE stuff....don... Sep 24 2005, 12:18 PM
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th April 2026 - 03:41 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.