 what clutch tranny piece am i missing?, i know im missing something |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Flat VW |
 Oct 5 2005, 07:23 PM
Post
#1
|
|
Illegal Soapbox Derby Racecar  Group: Members Posts: 1,692 Joined: 13-November 04 From: Phoenix, AZ Member No.: 3,105  |
so i was laying under the car today looking for the clutch connection to the tranny.
found it (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) i found the pully thing that the clutch cable goes around then i found where the cable should attach to and its not... (IMG:http://www.914world.com/bbs2/html/emoticons/sad.gif) so i can see the rod that comes out of the passenger of the tranny and there is a fork on the end and it has a slot cut in it. i can see that there should be some piece of metal the the clutch cable runs through and then there should be a bolt on the end im guessing. so does anyone know what the missing piece is and where i could pick one up? i have attached a picture of the fork coming out of the tranny one more thing that kinda worries me... when i pull on the lever coming out of the tranny it dosent budge should it? i made sure it was out of gear first, i dont know if that would make any difference so...is that normal? sorry the picture is such low quality its the best i could do. the rod/fork thing im talking about is pretty much in the center of the frame (IMG:http://www.geocities.com/shaggy_nine14/img_1596.jpg) -shaggy (sorry im logged on as my dad) |
   |
 
|
  |
Replies
| hmeeder |
Oct 5 2005, 07:59 PM
Post
#2
|
|
Dante's Sportscar Group: Members Posts: 352 Joined: 21-November 04 From: San Diego, CA Member No.: 3,154 |
John;
I'm not drunk enough to focus on your picture, but it almost seems as if the shift fork may be for rounded bosses as opposed to the triangular bosses on the shift fork trunion that 736 is offering you (sweet deal, by the way. Are 914 people great or what?) Would these rounded bosses mate well or the triangular ones? (IMG:http://content.performanceproducts.com/PORSCHE/101574/A54PP149C.jpg) The reason I ask is that my car has the rounded ones which I understand was on the 911, so the DPO may have scavenged it off an early 911 (would it fit? I don't know.) Maybe my car is an aberration? I bought this metal trunion (as mentioned, the plastic ones are crap) (IMG:http://content.madirect.com/img300/fr2215.jpg) Available from Tweeks Metal Clutch Trunion |
|
|
|
Posts in this topic
Flat VW what clutch tranny piece am i missing? Oct 5 2005, 07:23 PM
736conver John,
Cover the shipping and I can send you the p... Oct 5 2005, 07:38 PM SirAndy Oct 5 2005, 07:42 PM dmenche914 The stock piece shown in the other post was made o... Oct 5 2005, 07:46 PM Andyrew one to talk andy.... lol
Mine has yet to fall apa... Oct 5 2005, 07:54 PM 736conver Its a 911 part
Part#91142320503 Oct 5 2005, 07:57 PM dmenche914 the shift fork contact point with the little winge... Oct 5 2005, 08:03 PM Dave_Darling The 911 part works just fine. The plastic, as men... Oct 5 2005, 08:49 PM bd1308 I used a 2 or 3 M8s and apparently what I believe ... Oct 5 2005, 08:57 PM SirAndy Oct 5 2005, 09:15 PM bd1308 what now?
actually I just remembered that the thr... Oct 5 2005, 09:21 PM shaggy thank for the help
i need my car to be running so... Oct 5 2005, 09:25 PM bd1308 I wouldn't use locktite.....it would be a huge... Oct 5 2005, 09:39 PM shaggy thank for telling me where to fine one
do you hap... Oct 5 2005, 09:45 PM bd1308 Oct 5 2005, 09:49 PM Dave_Darling M7 nuts; use two of them tightened against each ot... Oct 6 2005, 12:11 AM
Flat VW Shaggy (my boy Jim) fixed it (with your help)... Oct 6 2005, 05:53 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th June 2024 - 09:29 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.