 944 CV SWAP, It actually works |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| RON S. |
 Nov 8 2005, 07:36 AM
Post
#1
|
|
9140430841, FINALLY RUNNING  Group: Members Posts: 1,216 Joined: 22-May 03 From: WALTERBORO,S.C. Member No.: 724 Region Association: South East States  |
I gotta give a thanks to Aaron and all the others who passed on the info that 944 cv's and 914/4 axles are a much more wallet friendly alternitive to a custom made axle setup for a 914/6.
Everything work as indicated,with one exception. I chose to take the 944 stub axle,and machine the bearing contact area flat as the original /6 stub.With a small radius in the corner. I did this to get an additional .200" of free movement in the axle shaft,since I had to program up an adaptor for my 915 trans output flange.No spacer is used. ( HINT)Use a ceramic insert in your tool holder,and this is a less than 10 minute job. All said,I have about 3/4-1" of total axle float with everything locked down,and the car stiing level on pavement. Ron Attached image(s) 
|
   |
 
|
  |
Replies
| RON S. |
Nov 8 2005, 07:40 AM
Post
#2
|
|
9140430841, FINALLY RUNNING Group: Members Posts: 1,216 Joined: 22-May 03 From: WALTERBORO,S.C. Member No.: 724 Region Association: South East States |
The Car is now outa the garage under its own power for probably the first time in 16 years.
A few more minor details,like getting a matching set of rear wheels,and It's insurance and tag time baby. Thanks Guys, Ron Attached image(s) 
|
|
|
|
Posts in this topic
RON S. 944 CV SWAP Nov 8 2005, 07:36 AM
Root_Werks Cool 914! Love those rear flares! <... Nov 8 2005, 01:31 PM Aaron Cox glad it came out that way ron.
i have the stub ax... Nov 8 2005, 02:17 PM Aaron Cox and here is the drawing....
http://www.914world.c... Nov 8 2005, 02:17 PM jkeyzer And the award for "most unreadable font of the yea... Nov 8 2005, 02:43 PM boboli914@att.net Thanks for the email Ron. Reponse sent. Nov 8 2005, 03:15 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st August 2025 - 03:35 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.