 2.o Euro pistons |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| r_towle |
 Nov 10 2005, 06:40 PM
Post
#1
|
|
Custom Member  Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
 |
Does anyone have a set of 2.0 Euro pistons out of the box and could give me a measurement.
I am looking for top of piston to top of ring #1. A pic would help too... Thanx Rich |
   |
 
|
  |
Replies
| r_towle |
Nov 10 2005, 07:08 PM
Post
#2
|
|
Custom Member Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States
|
its ok...I was just measuring the dished top ones.
The top to pin seems to be the same, top to ring is a little bit over 7mm So, I could take a bit off the top of the dished pistons to flatten them out and still stay away from the ring a safe distance... Now, on a stock engine, I heard there is a head gasket, that if removed, I could get the CR into the same range as the Euro pistons...maybe not exactly the same, but closer than stock.... Rich |
|
|
|
Posts in this topic
r_towle 2.o Euro pistons Nov 10 2005, 06:40 PM
Mueller I measure 6mm on this one...... Nov 10 2005, 06:53 PM r_towle thanx,
While your there...
Top to center of pin ... Nov 10 2005, 06:56 PM Mueller 35mm
hopefully someone else will confirm these nu... Nov 10 2005, 06:57 PM Jake Raby The head gasket should be removed no matter what, ... Nov 10 2005, 07:40 PM Joe Ricard Ya see .... somebody else is a genious like me.
I ... Nov 10 2005, 07:44 PM Joe Ricard YA know What? I was just reading Mike's Turb... Nov 11 2005, 08:34 AM
Jake Raby Yep- They really help with the deck volume for a T... Nov 11 2005, 09:56 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 14th July 2025 - 12:26 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.