 short shifter, shifter now hits clutch cable tube |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mikelsr |
 Nov 13 2005, 09:58 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 657 Joined: 2-January 05 From: Mahomet, IL Member No.: 3,390 Region Association: Southwest Region  |
I installed a short shifter and I when I went to test it I found that I can't get into 4th or 5th gear because the extended shifter now hits the cluch cable tube. I have rotated the shift bar to try and compensate for the new length with little success. Any ideas?
TIA, Mike |
   |
 
|
  |
Replies
| mikelsr |
Nov 13 2005, 05:19 PM
Post
#2
|
|
Senior Member Group: Members Posts: 657 Joined: 2-January 05 From: Mahomet, IL Member No.: 3,390 Region Association: Southwest Region |
Thanks. I put some 10mm spacers in and still needed to go higher. I need to get some longer bolts, cut some longer spacers and if that works, then form up and cut out a real spacer.
Mike |
|
|
|
Posts in this topic
mikelsr short shifter Nov 13 2005, 09:58 AM
Cap'n Krusty Rotating a straight rod doesn't result in much... Nov 13 2005, 10:22 AM mikelsr I had thought about raising it up. Thanks. Nov 13 2005, 10:31 AM r_towle I had the weltmeister kit (which I have since remo... Nov 13 2005, 10:45 AM Dr Evil I have the Weltmeister kit currently and the space... Nov 13 2005, 05:16 PM Racer Chris When this happened to me I discovered that the clu... Nov 13 2005, 07:15 PM
mikelsr Thanks for the info. I did look at the clutch cabl... Nov 14 2005, 09:30 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 11:02 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.