 CR/Interferience question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| r_towle |
 Nov 15 2005, 06:35 PM
Post
#1
|
|
Custom Member  Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
 |
On a stock US 2.0 liter with the dished pistons...
If the head gasket is removed...no cylinder base gasket is installed. What is the new compression ratio...circa??? Do the valves have a chance of hitting the top of the piston... I have not doe this, so I dont know what it looks like yet...just want to see if someone knows already... Rich |
   |
 
|
  |
Replies
| Aaron Cox |
Nov 15 2005, 06:36 PM
Post
#2
|
|
Professional Lawn Dart Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: Corona, CA Member No.: 219 Region Association: Southern California |
rich -
im in the same boat. pulling the heads to remove head gasket. i have a 94mm euro piston..... and a big cam. not sure how much deck i can lose to up the c/r... |
|
|
|
Posts in this topic
r_towle CR/Interferience question Nov 15 2005, 06:35 PM
SLITS Engineers.....sheeeeesh
http://www.csgnetwork.com... Nov 15 2005, 06:47 PM Aaron Cox i dont know my deck height.... yay. more stuff to ... Nov 15 2005, 06:51 PM Mark Henry Measure measure MEASURE!!!!!
... Nov 15 2005, 06:51 PM Dr. Roger i've seen those valve to piston clearances get... Nov 15 2005, 07:00 PM r_towle so your saying that stock pistons stick out of the... Nov 15 2005, 07:02 PM Mark Henry http://www.914world.com/bbs2/html/... Nov 15 2005, 07:05 PM Mark Henry <... Nov 15 2005, 07:10 PM SLITS If your really hot....
bring pistion to absolute ... Nov 15 2005, 07:15 PM Mark Henry BTW if you take out the head gasket most likely yo... Nov 15 2005, 07:15 PM nebreitling you definitely want to cc your heads and (re)set y... Nov 15 2005, 07:35 PM r_towle Nov 15 2005, 07:38 PM r_towle Let me ask a detailed question.
Does the CR in an... Nov 15 2005, 07:45 PM SLITS I also would coat the head and clay with a little ... Nov 15 2005, 07:55 PM Aaron Cox so. ron, ill bring my motor by, and we can do this... Nov 15 2005, 07:56 PM SLITS <... Nov 15 2005, 08:49 PM
type47 CR is about 7.6:1 + or - alot. stock CR was 7.6 ac... Nov 15 2005, 09:28 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 10th May 2025 - 08:05 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.