 crank end play, how much |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| toon1 |
 Dec 4 2005, 10:00 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,849 Joined: 29-October 05 From: tracy,ca Member No.: 5,022  |
How much front to back movement should I be getting on the crank? I seem to have quite alot approx. 1/16".
|
   |
 
|
  |
Replies
| Mark Henry |
Dec 5 2005, 06:12 AM
Post
#2
|
|
that's what I do! Group: Members Posts: 20,065 Joined: 27-December 02 From: Port Hope, Ontario Member No.: 26 Region Association: Canada |
The crusty one is right.
Factory spec new is .003 to .006, I always try for the lower number. Bottomend's method is sound, but since it's rare to find an shim the exact size you need, I often do the math on all the shims to get it just right. You do all of this before you install the main seal AND new flywheel O-ring. |
|
|
|
Posts in this topic
toon1 crank end play Dec 4 2005, 10:00 PM
Cap'n Krusty If you have that much with the flywheel installed,... Dec 4 2005, 10:12 PM toon1 the flywheel is off Dec 4 2005, 11:49 PM bottomend It should be .004 axial play. No more. No less.
... Dec 4 2005, 11:54 PM Cap'n Krusty Dec 5 2005, 12:47 AM
Garland You do all of this before you install the main sea... Apr 28 2007, 11:02 PM bottomend Oh yea and I'd add that you SHOULD measure the... Dec 5 2005, 12:20 PM LvSteveH You just risk damaging the rear main seal by takin... Apr 29 2007, 04:37 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 12:11 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.