 Got some new wheels, ...streets for the six |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| nynone4 |
 Dec 6 2005, 01:59 PM
Post
#1
|
|
Hammer to fit. Paint to match.  Group: Members Posts: 353 Joined: 20-May 03 From: East Peoria, Illinois Member No.: 713 Region Association: None  |
Picked these up last week on the SCCA forums board. They are ROH wheels and are boxster fitment (17x7.5" front and 17x8.5" rears). Looks like I'm going to need some spacers.
For you guys here running boxster wheels - what width spacers are you running (if any at all)?? Attached image(s) 
|
   |
 
|
  |
Replies
| mskala |
Dec 6 2005, 02:47 PM
Post
#2
|
|
R Group: Members Posts: 1,931 Joined: 2-January 03 From: Massachusetts Member No.: 79 Region Association: None 
|
I'm in the process for 7x16 Boxster wheels. Haven't measured them yet.
For the rear anyway, the proper offset for centering the wheel/tire between the inner and outer fender (with any wheel width) is roughly 36mm. Boxster 7x16 have an offset of 40mm. What is the offset of the 7.5 and 8.5x17? If much more than 36 you will need spacers. Offset on any of the boxster wheel sets is different front and rear if I recall. |
|
|
|
Posts in this topic
nynone4 Got some new wheels Dec 6 2005, 01:59 PM
nynone4 Tight in the front... Dec 6 2005, 02:00 PM nynone4 ...and the rear. Dec 6 2005, 02:01 PM BIGKAT_83 I won a auction on Ebay for the same type wheels a... Dec 6 2005, 02:07 PM Joe Ricard http://www.914world.com/bbs2... Dec 6 2005, 02:09 PM Mueller until you install tires or know what size you want... Dec 6 2005, 02:50 PM nynone4 Yeah - the rear fenders have a subtle flare to the... Dec 6 2005, 05:10 PM Andyrew Boxster 17's require 1inch spacing up front on... Dec 6 2005, 05:50 PM Andyrew That was for non flared car... mine takes um....
... Dec 6 2005, 05:51 PM
nynone4 ... Dec 6 2005, 08:49 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 04:21 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.