Custom front sway bar???, Coleman racing |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Custom front sway bar???, Coleman racing |
Andyrew |
Dec 10 2005, 10:25 PM
Post
#41
|
Spooling.... Please wait Group: Members Posts: 13,376 Joined: 20-January 03 From: Riverbank, Ca Member No.: 172 Region Association: Northern California |
I really wouldnt mind putting a bigger front sway bar on my car, but since im plowing from understeer around town, im not really worrying about it..
BUT I am not rather liking the 350 or 500 I'd have to spend to get a good bar on my car. I currently have a stock bar up front, and 22mm T bars (ya, thats my kicker up front...) I was thinking that one of these coleman bars would work.. (IMG:http://www.colemanracing.com/catalog/images/pn658.jpg) They have the bar thickness from 3/4in to 1 1/2 in... Bar is 37.5 in long... Could it work? I know there will be fabrication involved (im cool with that.. only means more fun..) http://www.colemanracing.com/catalog/index...&sort=2a&page=1 Also, they have Just the bars at different lengths. But only at 1 1/4 thickness. Lengths from 32" to 43" and .125, .188, and .25 wall (whatever that means) Bars by themselves for 110 bucks. Any thoughts?? |
Brett W |
Dec 11 2005, 04:14 PM
Post
#42
|
Advanced Member Group: Members Posts: 2,856 Joined: 17-September 03 From: huntsville, al Member No.: 1,169 Region Association: None |
something just occured to me. When I was running 180lb rear springs and a 23mm front bar it always ran it in the middle. any more and it was too strong and the car would push in tight turns. The problem with the Weltmeister bar is the end links don't have enough adjustment when the car is lowered. they are too long and you have to cut them off and shorten them.
Check this out: http://cgi.ebay.com/ebaymotors/nascar-race...1QQcmdZViewItem I have bought from this guy before |