weber tuning, questions |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
weber tuning, questions |
r_towle |
Feb 6 2006, 03:41 PM
Post
#1
|
Custom Member Group: Members Posts: 24,591 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
ok,
So I have one rich and one perfect plug on one side... I will use the idle mixture screw to adjust this condition... What is the air bypass screw for, where do you guys set it, and how does it change the way the carb tunes?? I was having some sooty exhaust, so I checked the floats..perfect..if not just a tad lean...11mm which is ok with me... Rich |
r_towle |
Feb 6 2006, 04:09 PM
Post
#2
|
Custom Member Group: Members Posts: 24,591 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
thanx...that will work...
I hope...kinda hard getting a screwdriver in there... Could I potentially set the carbs (the air bypass screw) on the bench with a vacuum cleaner hooked to the bottom of the manifold..?? I know that may sound stupid...but I would have a hard time doing otherwise... Would a vacuum create enough suction to produce the correct effect?? Rich |
Lo-Fi Version | Time is now: 11th June 2024 - 06:43 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |