New Terry Cable BROKE Options

[Kerrys914]

(IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif)

Last weekend I broke my year old throttle cable (IMG:http://www.914world.com/bbs2/html/emoticons/mad.gif) I decided to order a Terry Cable (best out there?) from PParts.

The cable came in on Thursday (very good shipping time from CA to VA). I installed the cable today..too longer then I thought it would. It was a pain to remove the A/C console, pedal board, and snake the cable in while the car wa on all 4's. (IMG:http://www.914world.com/bbs2/html/emoticons/dry.gif)

After adusting the cable so I had full open and the pedal stop so I would stretch the cable. I figured I was done. As I was depressing the pedal by hand SNAP (IMG:http://www.914world.com/bbs2/html/emoticons/dry.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif)

WTF

After getting back in there I discovered the cable pulled out of the threaded piece that connects to the pedal linkage. WTF (IMG:http://www.914world.com/bbs2/html/emoticons/ohmy.gif)

So I have contacted PParts to see what they will do?? (IMG:http://www.914world.com/bbs2/html/emoticons/mad.gif)

I thought the $40 cable would hold up better then this..

[Kerrys914]

I am rethinking my bellcrank linkage. Not sure if it is adding to the stress/tension required to go to 100% open.

I think "z" / "*" made a -4 style linkage piece on his six???

I might do some mods to the one I have?? It does make a hard bend around the CV.. Wonder if it could be pulled from below the CV and not above it. (IMG:http://www.914world.com/bbs2/html/emoticons/dry.gif)