 welt HD shifter springs, do they really help? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| sk8kat1 |
 Mar 10 2006, 09:01 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 911 Joined: 10-October 05 From: belvidere ,IL Member No.: 4,937  |
I have an issue with when I am shifting 1--> 2nd it seems to nick reverse or grind very lightly .... I tried to adjust the cluch but it really doesn't seem to make a huge differance
it seems to get better once the car warms up a bit but never goes away completely I am going to be draing the trans fluid and putting in swepco 201 hoping to help this some I read the description of the welt kikt and it seems to describ my situation but wanted to know if anyone has experiance with the kit or if anyone has any other thoughts on my issue |
   |
 
|
  |
Replies
| DonTraver |
Mar 10 2006, 09:37 AM
Post
#2
|
|
Senior Member Group: Members Posts: 829 Joined: 5-August 04 Member No.: 2,461 |
If you want a bit more spring pressure, simply add 1 or 2 washers between the spring and the housing on the spring shaft. It works, and it's much cheaper than the kit. Bit of a pita, you can clamp the shifter in a vice to add the washers/shims. I did it years ago, 1 washer on each spring, shifts easy, shifts out of first into second real nice.
Good Luck, Don |
|
|
|
Posts in this topic
sk8kat1 welt HD shifter springs Mar 10 2006, 09:01 AM
john rogers They do help somewhat. You probably could also use... Mar 10 2006, 09:09 AM Bleyseng If you are nicking 1st/rev then the shifterplate i... Mar 10 2006, 09:10 AM Cap'n Krusty IMO, and notice it ain't IM"H"O, the stock sh... Mar 10 2006, 09:14 AM rhodyguy redo the 2 bushings that cradle the ball on the sh... Mar 10 2006, 09:16 AM sk8kat1 It also grinds a lil' bit at a stop light goi... Mar 10 2006, 09:25 AM URY914 Mar 11 2006, 10:28 AM lotus_65 do any of you have a line on a bushing kit? i was ... Mar 11 2006, 11:18 AM sk8kat1 I was just looking through the receipts from the P... Mar 11 2006, 03:53 PM olav I add the spring kit and it helped a lot to spring... Mar 11 2006, 04:07 PM Aaron Cox get a rennshift http://www.914wo... Mar 11 2006, 04:11 PM Dr Evil Your tranny needs attention = bad news.
2nd, you ... Mar 11 2006, 07:37 PM
Joe Ricard I had Welt springs and the plate in my car. I bro... Mar 11 2006, 08:40 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 07:18 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.