Suspension swap, Swap 911/930 front suspension to my 914 |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Suspension swap, Swap 911/930 front suspension to my 914 |
spyder9014 |
Feb 9 2003, 02:14 PM
Post
#1
|
Newbie Group: Members Posts: 2 Joined: 9-February 03 Member No.: 274 |
What are the benefits of using 911/930 front suspension on a 914.
I have installed gas shocks, turbo tie rods but I have seen it recommended to use the 930 front suspension. Is this just to get the brakes or is this for struts/brakes/torsion bars? If I upgrade the calipers and rotors will it be just as good as a complete swap? |
rickyhgarcia |
Apr 1 2006, 12:15 AM
Post
#2
|
||
UPS truck is here... Group: Members Posts: 293 Joined: 13-June 04 From: Miami, Florida Member No.: 2,198 |
Eric, This is the text from Rich´s email when we were talking about doing these mods: "We will use the "A" spindles I have with a 914 Boge tube. In this combination you can use the 914 Koni Sport insert for proper valveing range and still raise the spindles. I have good luck setting the spindle height at 17mm for 15" wheels and 19mm for 16s and above." However, the 911SC front suspension I had was with the Bilstein struts. Perhaps this is why it could not be used if I intended to use the 914 Koni inserts. |
||