A bunch or semi random questions(914 related) Options

[DerekKim]

Hello everyone. So I have had some questions on several thigns buzzing around my head so i figured what better time than now and in one post. So first off. The guy I bought it from gave me a load of things so I can work on it for a while. I'll start with the easy stuff. My sound deadening pad is all grody and falling back which is a pain when trying to get to the dipstick. He gave me a new one but I have a few questions. One what is a good adhesive remover to get rid of the old junk and two what is a good spray adhesive to stick it back on. Next question. I also got a set of Camp914's rear trunk shocks kit and it is a pain trying to get the top in and out while holding the lid open with my head. The instruction i got are quite blurry. Is there somewhere that I can get some clearer instructions? Next question. I'm not sure if I'm exactly putting my targa into the right position. Could I get a pic(s) of proper installation of targa top. Two more questions. My plastic clip broke on the passenger side door handle. I have a new one but am clueless on how to get the handle off. Does this require removal of doorcard on the inside? Last question. The key only works in the ignition. A buddy of mine told me that I can reset the tumblers on all of the locks? Is this possible or do I need to remove the lock on one and go take it to a smith to get a key made? Again if anything sounds awkward ask me to clarify and I will try to the best of my ability.

Derek

[So.Cal.914]

Yes You can have your locks re- keyed, I believe there was a thread on here that

addressed this, you can do it yourself.

The door release is held on with two nuts one is on the inside of the door.

There is not much room behind the backpad for dynamat. I did see something on

here about a new generation sound pad, I believe they said it was waterproof

and the edges were bound. Looked good.

(IMG:style_emoticons/default/smoke.gif)