Front brake problem? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Front brake problem? |
GaroldShaffer |
Aug 27 2006, 11:04 AM
Post
#1
|
You bought another 914? Group: Benefactors Posts: 7,624 Joined: 27-June 03 From: Portage, IN Member No.: 865 Region Association: None |
Question about front brakes. I ran our local AX on the 20th, on my 4th (of 6 runs) when I came in to grid it sounded like I had a rock stuck between the dust cover and rotor. I did the back up hit brake trick a few times and it still made that sound. It was coming from the passenger side front. I quickly jacked up the car and pulled the wheel. I didn't find any stones, I turned the rotor by hand and didn't here any noise. I put the tire back on and continued to race and all was good. On the way home I started to hear the "rubbing sound" sound again, but it would stop if a lightly tap the brakes.
I finally have time today to look at this. With the front wheel on or off it sounds like metal rubbing the rotor when I spin the wheel / rotor. It seems to me that pads are making contact with the rotor, but I need to check the venting clearance. I have never messed with brakes before, what should I be looking for? I'm heading off to sears to get a fueller (sp) guage, dial caliper and micrometer. A man gotta have tools for the job. (IMG:style_emoticons/default/rolleyes.gif) (IMG:style_emoticons/default/smash.gif) |
Eric_Shea |
Aug 27 2006, 11:18 AM
Post
#2
|
PMB Performance Group: Admin Posts: 19,279 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains |
Same exact thing happened to me at Laguna Seca during the 98 Historics.
Wheel bearing. Now... if it is a brake problem it might be a sticky "knockback" mechanism in that caliper. They are designed to knock the piston back toward the rotor offering a higher pedal feel in return. They have been known to be problematic, even loosing a few races because of front brakes overheating in battle. If you decide to do a rebuild, either concentrate on cleaning those mechanisms thoroughly (they reside inside your pistons and ride on the pin inside the caliper) or... break them off. |
Lo-Fi Version | Time is now: 17th June 2024 - 01:03 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |