 Weber IDA Carb, Carb Issues |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Russ |
 Jul 20 2007, 08:35 AM
Post
#1
|
|
Newbie  Group: Members Posts: 34 Joined: 31-July 06 From: W. Columbia Member No.: 6,544  |
Histroy:
Recently my "14" was left in the rain due to a surprise thunder strom. The car is a semi track car, so it does not have a rain gaurd, with that said you should now were this is headed. So far I have removed the carbs and disassembled them, cleaned out the water, and reassembled the units, and reattached to the motor. Fired the car up and went for a test drive. The problem: With the car warmed-up and traveling at a steady velocity/ RPM ( 3000< RPM) the car is spitting/ or miss firing and when the accelerator pedal is released there is a great deal of popping thru the exhaust. Any help or suggestions would be greatly appreciated. Russell Turpin 803-606-7269 turpin0801@aol.com Attached File(s) 
Fat_Type_IV_Engines_1.pdf ( 44.31k )
Number of downloads: 124 |
   |
 
|
  |
Replies
| DonTraver |
Jul 20 2007, 08:50 AM
Post
#2
|
|
Senior Member Group: Members Posts: 829 Joined: 5-August 04 Member No.: 2,461 |
You said IDA carbs, so I will assume a 6. What kind of ignition,CDI? If it is, the harness plug to the CDI module can get wet and will cause all kind of missfiring and popping. Check all your connections, blow out with air, pull dist cap and dry. I always had to wrap the module when washing the car or all that would happen. The CDI ignition is/was the biggest continuing problem I had with my 6, finally trashed it and went MSD, no more problems.
|
|
|
|
Posts in this topic
Russ Weber IDA Carb Jul 20 2007, 08:35 AM
Russ
You said IDA carbs, so I will assume a 6. What k... Jul 20 2007, 09:50 AM
Russ
You said IDA carbs, so I will assume a 6. What k... Jul 20 2007, 09:53 AM Joe Sharp Check your idle jets and Sync the carbs. Jul 20 2007, 10:10 AM URY914 I had a puddle of water show up in the bowl of one... Jul 20 2007, 11:01 AM rhodyguy check for moisture in the distributor cap and arou... Jul 20 2007, 05:37 PM JPB Did ya tighten them down good on the intakes and u... Jul 20 2007, 08:00 PM Russ Thanks for all the suggestions. I'll givem a ... Jul 20 2007, 09:33 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd July 2025 - 01:44 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.