Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Rebuild Time?
Fyrmdk914
post Aug 13 2007, 01:17 PM
Post #1


Newbie
*

Group: Members
Posts: 27
Joined: 12-November 06
From: San Diego
Member No.: 7,203



Okay guys, I learned my lesson with my previous post. I am seeking knowledge from the panel. I have a 75 1.8, with 79k on the speedo. I assume that is at least 179k, or maybe the speedo has been changed, and the 79 doesn't have anything to do with the mileage on the engine. As far as I know, and the PO, this engine has never been rebuilt. It is currently running dual Delortos, I don't know what size or model. I use this car for commuting about 100 miles one way, once per week. On my last trip to work, she started blowing blue smoke when under compression braking, (going downhill). It doesn't smoke when under a load, or acceleration. The temp guage stays in the normal range, and under acceleration I don't notice any recent lack of power. There are some oil leaks with the engine, and not knowing how many miles are on the engine, I feel that it is time for rebuild. I do not have the tools, facility, or knowledge to rebuild myself, so I though about buying a long block. I have a friend, (not real local), that can help me with the swap out, but I do not want to impose on him to store the vehicle waiting for a rebuild of the original. I would like to stay at or under 2.0 liter, (for economy), and would like to run the dual carbs. I did look at the Raby Big 4, and initially I feel that I don't want to spend that much. Feedback and guidance? (IMG:style_emoticons/default/wacko.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Fyrmdk914
post Aug 14 2007, 11:21 AM
Post #2


Newbie
*

Group: Members
Posts: 27
Joined: 12-November 06
From: San Diego
Member No.: 7,203



I currently have a 1.8, and the replacement long block I am looking at is a 2.0. I guess the comparison I am looking for is 2.0 914 vs 2.0 bus motor. Any difference in compression, etc? I will have the appropriate cam in the rebuild for the dual carbs. I understand that the hydraulic heads require less maintenance than the stock 914 push rod configuration, but is there any compromise in performance? I am trying to have a more reliability oriented vehicle than performance oriented, although I wouldn't want to reduce the performance any! This car is fun enough to drive, and to have a car that's ready to drive anywhere, anytime allows for that much more fun!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 4th June 2024 - 04:19 PM