Refinishing dash face, Question about area around heater controls |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Refinishing dash face, Question about area around heater controls |
Lavanaut |
Aug 21 2007, 12:07 AM
Post
#1
|
Hungry Mind : Thirsty Gullet Group: Members Posts: 916 Joined: 20-June 06 From: Bend, OR Member No.: 6,265 Region Association: Pacific Northwest |
Search turned up lots of good info answering some other questions I had, but not this one. I pulled/replaced my heater controls while doing my dash recovering project. I just started rewiring the controls, before refinishing the dash, when I realized that this might be a mistake. Becuase I didn't have a factory dash to start with though, I don't have a good point of reference.
I'm rambling. Here's my question: is it only the chrome trim piece surrounding the heater controls that covers the dash face vinyl, or do the heater controls themselves overlap the vinyl as well? Here's a "before" pic, kind of blurry, sorry. You can see the wood just sits up against the edges of the controls (not underneath them at all). Can someone who's done this project please confirm that this is how the vinyl should be cut as well? I want to make sure I'm not screwing myself by installing the heater controls before I attach the new dash face. Thanks |
PRS914-6 |
Aug 21 2007, 12:24 AM
Post
#2
|
Excellence Magazine Project 914 3.6 Group: Retired Members Posts: 1,278 Joined: 20-May 06 From: Central California Member No.: 6,031 Region Association: None |
Vinyl goes on first and then the entire assembly slides in. So the answer to your question is the heater controls themselves overlap the vinyl.
|
Lavanaut |
Aug 21 2007, 12:55 AM
Post
#3
|
Hungry Mind : Thirsty Gullet Group: Members Posts: 916 Joined: 20-June 06 From: Bend, OR Member No.: 6,265 Region Association: Pacific Northwest |
Hmmm. I just went out and looked at the pieces. It looks to me like, if the control unit itself sits on top of the vinyl, the chrom trim piece would stick out too far, leaving a gap between itself and the vinyl.
This is a quick drawing, as if you're viewing a cross section of the dash face. With the controls sitting on the vinyl, and the chrome trim piece sitting on the controls, won't there be a gap? (IMG:style_emoticons/default/confused24.gif) Thanks for the reply by the way! |
Lo-Fi Version | Time is now: 15th June 2024 - 10:29 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |