 Where does the main wiring harness get run? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| purple |
 Aug 21 2007, 02:50 PM
Post
#1
|
|
Pigeon feeders attract me  Group: Members Posts: 938 Joined: 24-July 07 From: Houston, TX Member No.: 7,942 Region Association: None  |
Hey Guys,
I'm putting in a floorboard for the drivers side and I'm wondering if you guys can show me where you run your main wiring harness. I ask because mine is run behind the pedals, is this right? I test fit the floorboard and had to move the car, so I tried it and every time I pushed the clutch in the G light would come on and the gauges would jump around, since the pedal board is right up on the main harness. That's not right, is it? Thanks! Purple |
   |
 
|
  |
Replies
| Joe Ricard |
Aug 21 2007, 03:51 PM
Post
#2
|
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
There is a way for it to run behind and exit the board at the corner it goes up to the fuse panel.
the inboard side runs directly into the tunnel all under the board. You should have some of them bendy tabs on the vertical section of the foot well as a indicator of where it goes. |
|
|
|
Posts in this topic
purple Where does the main wiring harness get run? Aug 21 2007, 02:50 PM
purple Thanks Joe!
I have to pull the wiring out of ... Aug 21 2007, 04:00 PM
Joe Ricard Don't know. But I pretty much leave my stock ... Aug 21 2007, 04:24 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th June 2024 - 12:50 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.