Fuchs Center Caps, Wrong size Options

[warrenoliver]

How do I tell what size Fuchs centers fit on my 15" Fuchs? I have a set of 5 bolt Fuchs that I was told takes the "early 3 prong cap". Well, I bought one off evilbay (good thing I didn't buy all 4), and it is too small (IMG:style_emoticons/default/chair.gif)
The wheel hole is 2 3/4" and the cap I have is about 2 1/2". Which ones fit on these wheels?
BTW anyone interested in a single Fuchs center cap for what I put into it?


Warrenoliver.

[smg914]

It took me quite a bit of time to compile all this data but I thought I would do my good deed of the day and pass it on to everyone here on the web site. I realize there is one discrepancy with part # 911.361.020.42. The rear 8X15 Fuchs on my M471 GT are part # 911.361.020.42 but somewhere along the way I was told that this same part number was on someone’s 7X15 Fuchs but I really thing this is wrong.

901.361.016.00 5.5X14 46mm offset, 67-71 911 T/E & 914-6
911.361.016.10 5.5X14 46mm offset, 67-71 911 T/E & 914-6
901.361.012.01 4.5X15 42mm offset, ‘67 911S
901.361.012.04 5.5X15 42mm offset, ‘68 911S
901.361.017.00 5.5X15 (MAHLE, 9.9 lbs.) ‘70-‘71 911T & 914-6
901.361.012.03 6X15 36mm offset, early 6R wheel
901.361.012.06 6X15 36mm offset, ’69-’71 early deep dish
911.361.020.00 6X15 36mm, ‘72-‘73 (3-prong center cap)
911.361.020.10 6X15 36mm, ‘74-‘77 (ring type center cap)
901.361.012.05 7X15 49mm offset, deep dish, 911R
911.361.020.01 7X15 23.3mm offset (2.7RS)(3 prong center cap)
911.361.020.11 7X15 23.3mm offset (73-77carrera)(ring type cap)
911.361.020.41 7X15 23.3mm offset (911SC)
911.361.020.42 7X15 23.3mm offset
911.361.020.02 8X15 10.6mm offset
911.361.020.12 8X15 10.6mm offset (ring type cap)
911.361.020.42 8X15 10.6mm offset
911.361.020.03 9X15 3.0mm offset
911.361.020.06 9X15 3.0mm offset
911.361.020.05 11X15 46mm offset, 911RSR