Engine bay seals-door seals Options

[Mikey914]

Figured I'd add to the other seal thread to keep everything together. Just cut the die for the other 3 engine seals and have sample material back. I've checked it out and it fits as good as the original. I'm selling a strip that is cut in the field to fit. You would need less than 100" to do all 3, I'm sending at least 102" to allow for any variation.
You'll have to scroll down to the bottom, but picture is attached. This will do all 3 seals for $72+shipping (seals available after Oct 16th)
It's cheapest to send Priority mail flat rate for $9.20 domestic.
___________________________________________________________________


Ok, finally got the door seal materials back and checked for fit. These fit nicely. Not too large for the opening, but solid fit to the door. These are not oem. They are reproduction. They ARE NOT a generic seal that is just a bulb on the side of a trim channel like you see advertised on some ebay listings.

$32 for a set left and right.

Compare to 914-531-821-10 & 914-531-822-10
15
_________________________________________________

914-504-117-10 Reproduction Engine compartment seal above transmission $28

28

__________________________________________________________________

Paypal or check ok

[914werke]

RE: the bulb kit can you provide more desc. & or Pic's?
Do they work witht the fader of the OE light switch?

[Mikey914]

RE: the bulb kit can you provide more desc. & or Pic's?
Do they work witht the fader of the OE light switch?

The LEDs on the bulb kit are straight replacements for the bayonet bulbs that are in the car stock. Literally as simple as changing the bulb, no sodering or extra wirring. The LEDs do not dim. The are either on or off. They work with the factor fader switch to either be on or off. If you have an issue with night blindness, I would recommend the red kit as the red light will allow for better with white light vision (similar to aircraft cockpit night lighting).