 Carb fuel pump routing |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| KaptKaos |
 Oct 14 2007, 01:56 PM
Post
#1
|
|
Family  Group: Members Posts: 4,009 Joined: 23-April 03 From: Near Wausau Member No.: 607 Region Association: Upper MidWest  |
I am putting in new lines for my carbs. The hard line comes under the car, then connects to the old pumpt and filter. I am using the CB rotary pump and it's almost 12 inches long all in.
There is a mounting point for the fuel filter under the car, but if I try and mount the new filter there, then the lines under the car will be doing loops. Can i mount the pump underneath and then the filter above the tin? Is that a bad idea? Should I be doing this another way (other than moving the pump to the front). Let me know. Thanks! |
   |
 
|
  |
Replies
| Allan |
Oct 14 2007, 04:15 PM
Post
#2
|
|
Teenerless Weenie Group: Members Posts: 8,373 Joined: 5-July 04 From: Western Mesopotamia Member No.: 2,304 Region Association: Southern California |
The smaller cannister on the input side of the pump is a filter. The pump is internally regulated. You need a filter between the tank and the pump.
If you're going to install the pump in the stock location, put the filter up front under the tank. That's the route I took and it worked out well. |
|
|
|
Posts in this topic
KaptKaos Carb fuel pump routing Oct 14 2007, 01:56 PM
rhodyguy you can remove the extra canister. it's a cart... Oct 14 2007, 02:33 PM
KaptKaos
you can remove the extra canister. it's a car... Oct 14 2007, 03:19 PM KaptKaos Ok, so if I keep the filter that comes with the pu... Oct 14 2007, 05:23 PM Headrage Actually, what I did is buy another FI filter with... Oct 14 2007, 05:36 PM KaptKaos How about this:
I leave the filter on the pump a... Oct 14 2007, 07:13 PM rhodyguy use a stock, big, square filter. if yours is like ... Oct 14 2007, 07:15 PM KaptKaos
use a stock, big, square filter. if yours is like... Oct 14 2007, 07:48 PM KaptKaos Update:
Got the fuel pump and line run into the e... Oct 14 2007, 08:21 PM rhodyguy did you use the stock wire harness? if you look at... Oct 14 2007, 08:23 PM KaptKaos
did you use the stock wire harness? if you look a... Oct 14 2007, 08:30 PM Aaron Cox dont throw away the canister! its a catalytic ... Oct 14 2007, 10:17 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 09:57 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.