Progress today., Getting damn close |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Progress today., Getting damn close |
KaptKaos |
Nov 10 2007, 07:11 PM
Post
#1
|
Family Group: Members Posts: 4,009 Joined: 23-April 03 From: Near Wausau Member No.: 607 Region Association: Upper MidWest |
I have my carbs mounted and i hooked up most of the HE stuff underneath. I made a bracket for my throttle cable.
I reseated the dizzy, and plugged in the plug wires to the dizzy. Before we installed the motor, we marked the fan, and left it at 12 o'clock. Now with the dizzy installed, the rotor is (I assume) pointing at #1. I assume, maybe wrongly, that the dizzy fires clockwise. So 1,4,3,2 is how I wired them around. So ok so far? I have the hex bar linkage for the carbs. Problem seems to be that the bracket that I made might not be long enough. If I connect everything up as is, I don't get enough rotation to open the carbs all the way. Dunno if I am missing something, but any advice would be appreciated. I am hoping to fire it tomorrow. (IMG:style_emoticons/default/biggrin.gif) We'll see. |
Aaron Cox |
Nov 10 2007, 09:09 PM
Post
#2
|
Professional Lawn Dart Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California |
dizzy. pop cap off. twist rotor (advance). which way does it twist? thats what direction your motor turns (IMG:style_emoticons/default/tongue.gif)
breather. rear trunk firewall, dead center Left to right, 2 bolts. |
KaptKaos |
Nov 10 2007, 10:39 PM
Post
#3
|
Family Group: Members Posts: 4,009 Joined: 23-April 03 From: Near Wausau Member No.: 607 Region Association: Upper MidWest |
dizzy. pop cap off. twist rotor (advance). which way does it twist? thats what direction your motor turns (IMG:style_emoticons/default/tongue.gif) breather. rear trunk firewall, dead center Left to right, 2 bolts. AFAICT - Clockwise. Dead center is not flat. The box won't sit flush. |
Lo-Fi Version | Time is now: 2nd June 2024 - 04:14 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |