 MPS bolt down/securing, Pics? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Hammy |
 Dec 20 2007, 02:19 AM
Post
#1
|
|
mr. Wonderful  Group: Members Posts: 1,826 Joined: 20-October 04 From: Columbia, California Member No.: 2,978 Region Association: Northern California  |
I have my MPS bolted down in the stock location with the rubber grommets. But it doesn't seem very secure.
How secured down should it be? It doesn't feel as sturdy as it should I think... Also, anyone have pics of what a stock MPS setup location looks like? Thanks |
   |
 
|
  |
Replies
| jjs3rd914 |
Dec 20 2007, 09:27 PM
Post
#2
|
|
Member Group: Members Posts: 124 Joined: 8-August 04 From: Sarasota, FL Member No.: 2,476 |
We made an extender plate with the same mounting hole locations which bolts right to the original stock mounting plate. At its stock location the MPS is tight with the fuel rail and injector hoses (at least on our car). Also we installed A/C and the lines to the compressor fit better with the MPS sitting higher.
Thanks jjs3rd914   |
|
|
|
Posts in this topic
Hammy MPS bolt down/securing Dec 20 2007, 02:19 AM
jasons Do you have the little bracket? There is a bracke... Dec 20 2007, 06:53 AM ChrisNPDrider I used a longer SS pan head screw with a fat washe... Dec 20 2007, 12:53 PM Bleyseng The MPS is mounted using a trianglar piece with ru... Dec 20 2007, 03:20 PM Hammy I have the little triangle piece..... I have the o... Dec 20 2007, 03:58 PM jasons I think you are missing at least one bolt maybe 2?... Dec 20 2007, 05:32 PM orange914 how is the RE-d-jet coming along? have you fired ... Dec 20 2007, 06:57 PM Dan (Almaden Valley)
I have my MPS bolted down in the stock location w... Dec 20 2007, 07:03 PM ChrisNPDrider YUP - in Dan's pic I see the botom bracket hol... Dec 20 2007, 07:11 PM Bleyseng two screws are used in the bottom holes and a M6 b... Dec 20 2007, 07:16 PM Cap'n Krusty There are 3 bolts with washers, 3 grommets, and 3 ... Dec 20 2007, 07:22 PM Hammy
how is the RE-d-jet coming along? have you fired... Dec 20 2007, 08:22 PM
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 11:02 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.