 Taking stock, of what I'm dealing with |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| flipb |
 Oct 18 2009, 08:34 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,724 Joined: 2-September 09 From: Fairfax, VA Member No.: 10,752 Region Association: MidAtlantic Region 
 |
While I had my teener up on ramps today for an ill-fated oil change, I figured I'd take advantage of the photo op and take stock of what I've got. Other than a very dirty drivetrain.
A few things made me go hmmmm... So I'm going to post a few pictures here for comment. First up: There's a cable that parallels the clutch cable, and goes to the tail end of the transmission. While the clutch cable passes through the engine mount bar, this one passes below it. And in my case, it's pretty badly chafed at that point, as if it rubbed on a tight break-over on a bump. Photo #1 (IMG:http://lh4.ggpht.com/_adaRwINBOu4/Stu_mHuEJjI/AAAAAAAAAok/IWjI9ZyPngM/s800/IMGP0045.JPG) Photo #2 (IMG:http://lh4.ggpht.com/_adaRwINBOu4/Stu_nZGL6II/AAAAAAAAAoo/DsF5DCOfn0Q/s800/IMGP0047.JPG) Where that cable terminates: (IMG:http://lh3.ggpht.com/_adaRwINBOu4/Stu_vN93FdI/AAAAAAAAApA/IHqnrobB80I/s800/IMGP0056.JPG) |
   |
 
|
Posts in this topic
flipb Taking stock Oct 18 2009, 08:34 PM
flipb Question #2:
Do the bushings look right? Are they ... Oct 18 2009, 08:37 PM
flipb
Question #2:
Do the bushings look right? Are they... Oct 25 2009, 09:08 PM flipb
[quote name='flipb' post='1227485' date='Oct 18 2... Oct 26 2009, 07:46 AM flipb Question #3
Why the little gap where the case mee... Oct 18 2009, 08:39 PM flipb Anyone for tacos?
http://lh6.ggpht.com/_adaRwINBOu... Oct 18 2009, 08:41 PM Kirmizi Speedometer cable and it's drive unit, at the ... Oct 18 2009, 08:45 PM 76-914 #1-that's the speedo cable. looks alot nicer t... Oct 18 2009, 08:45 PM Sleepin #1 Speedo Cable - pretty common for them to look l... Oct 18 2009, 08:46 PM flipb Moving up top now...
Question #4.
I've got ... Oct 18 2009, 08:54 PM flipb Whatever number question we're up to now:
Eve... Oct 18 2009, 08:57 PM flipb Question 7:
I know my Weber progressive is Satan... Oct 18 2009, 09:03 PM Vacca Rabite You don't have your cooling flaps installed... Oct 18 2009, 09:08 PM flipb
You don't have your cooling flaps! You s... Oct 18 2009, 09:11 PM Gint especially with the single carb, it takes forever ... Oct 19 2009, 08:14 AM Dave_Darling Not having the flap on the driver's side will ... Oct 18 2009, 09:32 PM flipb
Not having the flap on the driver's side will... Oct 18 2009, 09:40 PM Cire If you took out the flaps and ran an external oil ... Oct 18 2009, 11:57 PM tat2dphreak might be running cool because of the progressive..... Oct 18 2009, 10:03 PM Kirmizi This is the only pic I have showing the bar Wayne... Oct 18 2009, 10:12 PM SirAndy Double check the the old thermostat and thermostat... Oct 18 2009, 10:41 PM stephenaki
Double check the the old thermostat and thermosta... Oct 19 2009, 06:53 AM Vacca Rabite
OK, silly question...maybe...can you get to the t... Oct 19 2009, 07:52 AM stephenaki
OK, silly question...maybe...can you get to the ... Oct 19 2009, 08:08 AM Vacca Rabite
Dude, your'e not making this sound easy! ... Oct 19 2009, 08:50 AM SirAndy
Double check the the old thermostat and thermost... Oct 19 2009, 11:33 AM type47 If it was me, I would not wrestle with trying to i... Oct 19 2009, 07:05 AM stephenaki
If it was me, I would not wrestle with trying to ... Oct 19 2009, 07:23 AM flipb Time to start saving up.
I think I'll get all... Oct 19 2009, 08:48 AM flipb Also, just FWIW... at the Potomac PCA Tech insp ye... Oct 25 2009, 09:10 PM type47 Yes, the pictured cover fits over the linkage. Don... Oct 26 2009, 08:17 AM flipb
Yes, the pictured cover fits over the linkage. Do... Oct 26 2009, 08:26 AM flipb Figured I'd re-awaken my old thread to share m... Mar 1 2011, 07:55 PM type47 :trophy: way to go with all the jobs on your car. ... Mar 1 2011, 09:04 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st May 2024 - 09:14 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.