 Dropping Front Suspension, Check Me On This Please |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| kconway |
  Jan 10 2010, 06:42 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,347 Joined: 6-December 04 From: Monrovia, CA Member No.: 3,231 Region Association: Southern California  |
I'm removing the front suspension complete and I've pulled all the bolts I can see and expected the whole thing to just drop to the floor. Check me on this to be sure I didn't miss something.
1. Removed the two nuts holding the struts in the trunk area 2. Removed and hung the calipers out of the way and the swaybar links 3. Removed 8 bolts underneath, 4 on the front bearing carriers, two on the rear by the torsion bar adjusters and the two holding the crossmember to the body. 4. Removed bolt from the steering ujoint coupler in the car just inside the firewall. I think thats it, and its not coming down. Don't want to force it until I'm sure. Did I miss something? I did NOT remove the two bolts that attach the rack to the crossmember as I'm going to install turbo tie rods as well so I wanted the whole thing to come out. Kev |
   |
 
|
Posts in this topic
kconway Dropping Front Suspension Jan 10 2010, 06:42 PM
scotty b Usually needs a little prying to get the initial d... Jan 10 2010, 07:00 PM r_towle Nope.
Take out the two bolts that hold the steeri... Jan 10 2010, 08:00 PM
scotty b
Nope.
Take out the two bolts that hold the steer... Jan 10 2010, 08:19 PM kconway I want to take the rack out with the the crossmemb... Jan 10 2010, 08:39 PM r_towle Take out the two allen head bolts that hold the st... Jan 10 2010, 08:42 PM Spoke I agree with Rich. Pop the tie rod ends, remove th... Jan 10 2010, 08:43 PM kconway Sucess! By removing the two allen head bolts ... Jan 10 2010, 09:53 PM Eric_Shea Kevin,
I thought I posted a reply here but I don... Jan 11 2010, 06:21 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th June 2024 - 01:20 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.