 Engine Mounts, For a Six |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Ericv1 |
 Feb 22 2010, 06:32 AM
Post
#1
|
|
Member  Group: Members Posts: 259 Joined: 30-December 07 From: Cincinnati, Ohio Member No.: 8,518 Region Association: Upper MidWest  |
While reading through Georges' six conversion booklet, he recommends using two 914-6 transmission mounts to use as engine mounts because they're heavier. I have a quick six bar and am going to use the original engine mounting locations on my four. Would a heavier duty 911 sport engine mount function just as well? They're also not as expensive as the 914-6 transmission mounts. Thanks for your help. |
   |
 
|
Posts in this topic
Ericv1 Engine Mounts Feb 22 2010, 06:32 AM
jt914-6 I would suggest using the Rich Johnson engine moun... Feb 22 2010, 06:36 AM 914Sixer Yes, they will work fine. Use them in the rear al... Feb 22 2010, 07:28 AM Mark Henry The quick /6 mount sucks, the Rich Johnson engine ... Feb 22 2010, 07:37 AM dr914@autoatlanta.com
While reading through Georges' six conversion... Feb 22 2010, 08:41 AM
Ericv1
While reading through Georges' six conversio... Feb 22 2010, 10:39 AM turboman808 Can anyone post pictures of what you are talking a... Feb 22 2010, 11:42 AM McMark If you didn't weld and it uses the stock four ... Feb 22 2010, 12:17 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th July 2025 - 04:09 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.