 Plumbing remote oil filter/cooler on a 2270?, Where to plumb out of T4 case? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jasons |
 Oct 27 2010, 08:27 AM
Post
#1
|
|
Jackstand Extraordinaire  Group: Members Posts: 2,002 Joined: 19-August 04 From: Scottsdale, AZ Member No.: 2,573 Region Association: None  |
I am having a 2270 built. Currently the oil galleys are tapped on the front of the case near the oil filter console location. This is where the oil will return. The plan is to run a remote oil filter and probably a front mounted oil cooler. The question is should I get oil output right off the front of the pump with a T1 pump cover or should I just plumb it out of the tapped oil galley on the front of the case? I know the T1 cover requires motor mount mods.
|
   |
 
|
Posts in this topic
jasons Plumbing remote oil filter/cooler on a 2270? Oct 27 2010, 08:27 AM
pcar916 There may be some answers here.
http://www.914wor... Oct 27 2010, 08:41 AM jasons :bump: Oct 28 2010, 07:37 AM JmuRiz Mine just has a console between the oil filter and... Oct 28 2010, 07:50 AM
jasons
Mine just has a console between the oil filter an... Oct 28 2010, 08:00 AM Jake Raby
Mine just has a console between the oil filter a... Oct 28 2010, 08:09 AM ConeDodger If you don't want to reinvent the wheel, you c... Oct 28 2010, 08:08 AM Mark Henry If you do a proper full flow system you need to mo... Oct 28 2010, 08:20 PM jasons
If you do a proper full flow system you need to m... Oct 29 2010, 07:57 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st May 2024 - 11:34 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.