 914 front ride hieght, 914 front adjustment screws |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tesserra |
 Apr 14 2003, 08:38 AM
Post
#1
|
|
Member  Group: Members Posts: 210 Joined: 26-March 03 From: Lafayette CA Member No.: 479  |
I have a 74 914 with which I am having trouble lowering the front end. The adjustment screws work fine but while the right side is loose all the way, the left side has .25-.50 of an inch left to lower. At this setting the car is level, however it is not as low as I would like it. Could the torsion bars be installed wrong? (off by a couple notches) The shocks have been replaced with Koni sports. Is it hard to change the settings of the front torsion bars? If I am gonig to take out the torsion bars to reset them should I just replace them while I am at it? (what size is recomended for an oversteering V8 conversion car)
Any advice appreciate. Tesserra |
   |
 
|
Posts in this topic
tesserra 914 front ride hieght Apr 14 2003, 08:38 AM
Jeffs9146 I did this 3 weeks ago!
Raise the car up on s... Apr 14 2003, 09:54 AM Gint You can pull the adjuster cap off and re-index it.... Apr 14 2003, 11:46 AM Brad Roberts Tesserra,
Your going to need at least a 22mm tors... Apr 14 2003, 11:48 AM tesserra :beer2: Thanks to all! It sounds as simple as ... Apr 14 2003, 12:10 PM Bleyseng When you install the new t bars be sure to install... Apr 14 2003, 01:41 PM
Brad Roberts Tessera,
Negative camber is decided by what kind ... Apr 14 2003, 02:48 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th June 2024 - 04:26 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.