 Will not go into gear - pls help, only 1st and Reverse - big grind |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| EJP914 |
 May 11 2011, 07:42 PM
Post
#1
|
|
Member  Group: Members Posts: 260 Joined: 14-June 03 From: Monroeville, PA Member No.: 821  |
Had to sit in about 1 1/2 mi traffic backup on the way home from work. On and off the clutch. Finally had a warm day in PA.
After a while, I found I could not put the shift lever into any gear except 1st or reverse and had big grinding sounds when I did. Put the car on ramps once home and found the plastic clutch cable guide wheel was distorted (from the heat?). It no longer turned straight and true. It moved in kind of a wobbly circle. If this guide wheel is not straight and plumb, would that cause me to not be able to put the car into gear or should I be looking for something else and expensive? Looks like I will have to replace the guide wheel regardless. Do I have to remove the clutch cable from the fork end or can I just remove the nut that holds on the guide wheel and slip the cable back over it. Is this wheel supposed to be periodically greased/oiled so it will move? This is my 4th 914 and never had this problem before. By the way, this is NOT the 914 I am trying to sell. THanks for the help! ED |
   |
 
|
Posts in this topic
EJP914 Will not go into gear - pls help May 11 2011, 07:42 PM
SGB If it was preventing the clutch cable from achievi... May 11 2011, 07:53 PM benalishhero What condition are your linkage bushings in? May 11 2011, 07:56 PM
Racer Chris Eurropean Racing Header? May 12 2011, 06:37 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th June 2024 - 04:42 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.