 SS HE wont fit on head. Please help !, PO had replaced head stud with bigger one |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 913B |
 Jul 22 2011, 08:15 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 852 Joined: 25-April 05 From: South Bay/SoCal Member No.: 3,983 Region Association: None  |
It had to the be studs where the HE bend is. The replacement bolt and screw is just too close to the heat exchnager pipe. It was ok when the previouse owner just had stock HE. But the SS HE are bigger and I cannot get a socket around the replacement nut.
Whats my options ? Hope and try to locate smaller nut at local Home Depot or McMaster I even thought about taking the HE to someone to heat it up and make a slight indention in it to give me more room. Am I screwed. Any thoughts. Thanks so much. Ted  |
   |
 
|
Posts in this topic
porsche913b_sp SS HE wont fit on head. Please help ! Jul 22 2011, 08:15 PM
geniusanthony I bought step studs recently from a Boston company... Jul 22 2011, 08:21 PM geniusanthony I actually read your post, I have a 1/4" driv... Jul 22 2011, 08:23 PM HAM Inc Get some 911 exhaust nuts. They are internal wrenc... Jul 22 2011, 08:26 PM 914Mels Is your stud still a 8mm? Nuts with a 12mm head ar... Jul 22 2011, 09:17 PM porsche913b_sp
Get some 911 exhaust nuts. They are internal wren... Jul 22 2011, 09:18 PM porsche913b_sp
Is your stud still a 8mm? Nuts with a 12mm head a... Jul 22 2011, 09:21 PM Dave_Darling He's just saying that the nut takes a 12mm wre... Jul 22 2011, 09:45 PM porsche913b_sp
He's just saying that the nut takes a 12mm wr... Jul 22 2011, 10:01 PM
ArtechnikA
The nut head is 14mm. So I dont think the 911 exh... Jul 23 2011, 05:01 AM SirAndy Get the stud out and use a bolt with a allen head ... Jul 22 2011, 10:13 PM porsche913b_sp
Get the stud out and use a bolt with a allen head... Jul 22 2011, 10:37 PM HAM Inc 9mm nuts (requiring a 14mm socket) are very uncomm... Jul 23 2011, 07:30 AM GeorgeRud Though you would have to drop that side's exha... Jul 23 2011, 08:45 AM HAM Inc If the stud is in securely I wouldn't fool wit... Jul 23 2011, 09:21 AM porsche913b_sp So I went to local OSH and figured the stud is 3/8... Jul 24 2011, 01:00 PM HAM Inc The alloy steel will be fine, and they are cheaper... Jul 24 2011, 07:01 PM porsche913b_sp Thanks HAM !! Jul 24 2011, 09:38 PM porsche913b_sp So the good news I found the allen nut and was abl... Jul 31 2011, 08:04 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st October 2024 - 06:30 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.