 What heads for my 2258? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tornik550 |
 Aug 7 2011, 08:51 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None  |
I built a 2258 shortblock last year and it has been sitting until I could get proper heads.
When I started on the engine, my goal was to build an auto-x engine. Now I simply want to drive the car on weekend- no racing. I do not plan on reving the engine very high. At most, spirited street driving. I am not sure what I should do, if anything to my heads. I would prefer to keep things the way they are but I also do not want to harm my engine. Here is my current setup- 2258 (78mm crank, 96mm pistons) weber 44idf Cam lift .507, lift at .050 is .262, duration 298 I have a freshly rebuilt set of very nice 2.0l heads So- my options are: -leave things the way they are -have the current heads ported and polished -p&p with larger valves please keep my wallet in mind |
   |
 
|
Posts in this topic
tornik550 What heads for my 2258? Aug 7 2011, 08:51 PM
Jake Raby Without head work that combo will make a ton of to... Aug 7 2011, 09:13 PM
tornik550
Without head work that combo will make a ton of t... Aug 7 2011, 09:23 PM HAM Inc Porting the 2.0 914 heads without up-sizing the in... Aug 8 2011, 05:52 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd June 2024 - 10:18 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.