 Teener handled great.........Until?, Let's hear the mistakes in the pursuit of speed. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jjackson |
 Oct 4 2011, 05:27 PM
Post
#1
|
|
Member  Group: Members Posts: 219 Joined: 5-October 10 From: maumelle, arkansas Member No.: 12,246 Region Association: None  |
Had a wonderful handling car from August 2010 till July 2011.Replaced entry level weltmeister 22mm sway bar with a speedway engineering used 22mm sway bar.I liked the idea of bearings through the body and the splined ends compared to the weltmeister setup.Modified the arms so they would work like sliders for adjustment.Have now run every 1/4 inch increment of adjustment from 3" to 7".Have not found the handling yet.In our current setup, that swaybar needs less than a 3" length on the arms.Would have a very small range of usable adjustment at those lengths.
Putting the weltmeister bar back on. It's possible that something else has changed at the same time-or during the runs since then. Results will tell. JJackson |
   |
 
|
Posts in this topic
jjackson Teener handled great.........Until? Oct 4 2011, 05:27 PM
yeahmag Wrecked my motor due to oiling issues as I got the... Oct 4 2011, 11:07 PM Racer Chris
...
Replaced entry level weltmeister 22mm sway ba... Oct 5 2011, 04:19 AM
jjackson
.
...
What's the wall thickness of the S... Oct 5 2011, 05:41 AM Racer Chris
...
Really surprised that the speedway bar is tha... Oct 5 2011, 11:16 AM jjackson
...
Really surprised that the speedway bar is th... Oct 5 2011, 02:54 PM Randal
[quote name='Racer Chris' post='1549569' date='Oc... Oct 8 2011, 12:44 PM jjackson .
Help me with the logic here JJ.
So you ... Oct 8 2011, 04:03 PM patrick3000 Removed a perfectly good 1.7 engine for a 2.4 four... Oct 5 2011, 04:42 PM Borderline I bought a Quaife torque biasing diff. Drove it f... Oct 5 2011, 10:37 PM jjackson
I bought a Quaife torque biasing diff. Drove it ... Oct 6 2011, 06:15 AM brant I used to love my locked... welded diff
it took so... Oct 6 2011, 09:08 PM Borderline
I used to love my locked... welded diff
it took s... Oct 8 2011, 11:12 AM brant the locked diff is much more of a track item, than... Oct 8 2011, 12:42 PM Borderline I would look elsewhere. Like have the tires gone ... Oct 8 2011, 03:39 PM jjackson
I would look elsewhere. Like have the tires gone... Oct 8 2011, 04:10 PM Randal
I would look elsewhere. Like have the tires gon... Oct 8 2011, 10:45 PM brant check your rear swing arm suspension console
I... Oct 8 2011, 11:28 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st June 2024 - 09:31 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.